THE BUS MOVED!!!!!
The bus moved so we passed. then we got a celebration afterward. the only bad thing is we couldn’t see it because we had to go in to lock down. So we saw it start but the inside we went. and then we got the celebration: ICE CREAM!
KR's Biodiesel Blog
Tuesday, May 24, 2011
Monday, May 16, 2011
todays results 5/12
Today in class we drained the glycerin from the bottles that gathered there from the oil that had a chemical reaction with the oil, methanol, and the sodium hydroxide. Then we had to clean the room a little bit and clean the aprons and gloves as usual. An example of a catalyst would be sodium hydroxide and we used it as the catalyst.
todays results 5/11
Today in class we made the actual fuel. To do so we carefully measured each of the ingredients: 12 grams of sodium hydroxide, 250 mL of methanol and 1 liter of vegetable oil. Then we combined the sodium hydroxide and methanol. and shook the bottles until the sodium hydroxide dissolved and from the chemical reaction the mixture got pretty warm. Then after the sodium hydroxide dissolved we mixed in the oil and turned it six times then left it upside down in some beakers so that the glycerin would form at the bottom so we could drain it. Then as usual we cleaned up the room and the equipment.
Sunday, May 8, 2011
How the Diesel Engine Works
E- exhaust camshaft
W-water jet for coolant
S-spark plug
I-intake camshaft
V-valves
P-pistons
R-connecting
C-crank shaft
The diesel engine works by the spark plug lighting the fuel with the oxygen from the air that came in from the intake cam shaft. Then the fuel explodes forcing the piston down, which then turns the crank shaft which is connected to the drive shaft. Then the drive shaft uses gears to turn the axle which turns the wheels to make the vehicle go forward or backward. Then the fumes, that were created from the explosion, exit through the exhaust camshaft.
W-water jet for coolant
S-spark plug
I-intake camshaft
V-valves
P-pistons
R-connecting
C-crank shaft
The diesel engine works by the spark plug lighting the fuel with the oxygen from the air that came in from the intake cam shaft. Then the fuel explodes forcing the piston down, which then turns the crank shaft which is connected to the drive shaft. Then the drive shaft uses gears to turn the axle which turns the wheels to make the vehicle go forward or backward. Then the fumes, that were created from the explosion, exit through the exhaust camshaft.
Thursday, May 5, 2011
todays results 5/05
Today we strained yet another batch of oil and it worked out pretty well and by the looks of all the buckets we have i think that our class has the most. Everything worked out well, but the cheese cloth did nothing so we took it out and it worked the same.But it was pretty funny because when we were siphoning out a new bucket of oil it "burped" and splattered all over this guy in our class. So he went to the bathroom to clean himself up. Not a lot else happened other than that, but its still pretty fun and i cant wait for making the actual fuel.
Wednesday, May 4, 2011
todays results 5/04/11
Today in class we strained the oil and it was actually pretty fun. And I'm also surprised that for once people actually listened to me. yea so my basic idea of putting the strainer on the bucket then putting cheese cloth over it made sense and people listened to it. It worked out pretty well but after we saw what the first one was like we got the other bucket and in stead of taping the cheese cloth down we put another paint strainer on it. I think it worked better than the original but i don't quite know but we will find out soon. What I found out though along with pretty much everybody else in the class was that the cheese cloth didn't really do any thing because the holes were too big for any of the particles so the paint stainer did most of the work. So I'm thinking that we should use some finer cloth but it has to be like actual cloth like on a shirt or something just not a towel because that will not only soak up the oil a lot more it will also slow it down A BUNCH.
Tuesday, May 3, 2011
what the project is about
A few days ago we were told that we would have to move a bus that has been sitting in the exact same place with out any fuel for as long as I’ve been at this school and the best part is that we have to make the fuel by hand from scratch and with barely any help. And also if it doesn’t run then we all fail the project so this is pretty stressful. so here are a few websites on how to make the oil, how to purify the cooking oil and how a diesel engine works.
how to make bio diesel:
http://biodieselmake.com/
the site is useful because it gives a very detailed description of how to make bio diesel fuel
it also gives helpful hints on how much lye(sodium hydroxide).
http://officialbiodiesel.com/
this site is useful because it has a bunch of facts about bio diesel and how good it is for the environment and for your engine and even your wallet because it can save you a bunch of money.
http://www.dangerouslaboratories.org/biodiesel.html
this website is useful because it gives an exact recipe of how to make it and it gives
----------------------------------------------------------------------------------------------------------------------------
how to purify used cooking oil:
http://www.democraticunderground.com/discuss/duboard.php?az=view_all&address=236x84747
This web site is useful because it gives simple but seemingly effective way of cleaning the oil and it sounds like it uses house hold materials.
http://www.ehow.com/how_5948902_purify-waste-vegetable-oil.html
well ehow has never let me down before so i trust it but it also gives a simple but seemingly effective way of how to purify the oil.
----------------------------------------------------------------------------------------------------------------------------
How a Diesel engine works:
http://www.howstuffworks.com/diesel.htm
gives a diagram of a diesel engine. It also describes how an engine works.
http://www.kent4x4offroading.co.uk/how_does_a_diesel_engine_work.htm
It gives a tells how a diesel engine runs step by step in detail with at least 3 different explanations to how that phase of it works.
how to make bio diesel:
http://biodieselmake.com/
the site is useful because it gives a very detailed description of how to make bio diesel fuel
it also gives helpful hints on how much lye(sodium hydroxide).
http://officialbiodiesel.com/
this site is useful because it has a bunch of facts about bio diesel and how good it is for the environment and for your engine and even your wallet because it can save you a bunch of money.
http://www.dangerouslaboratories.org/biodiesel.html
this website is useful because it gives an exact recipe of how to make it and it gives
----------------------------------------------------------------------------------------------------------------------------
how to purify used cooking oil:
http://www.democraticunderground.com/discuss/duboard.php?az=view_all&address=236x84747
This web site is useful because it gives simple but seemingly effective way of cleaning the oil and it sounds like it uses house hold materials.
http://www.ehow.com/how_5948902_purify-waste-vegetable-oil.html
well ehow has never let me down before so i trust it but it also gives a simple but seemingly effective way of how to purify the oil.
----------------------------------------------------------------------------------------------------------------------------
How a Diesel engine works:
http://www.howstuffworks.com/diesel.htm
gives a diagram of a diesel engine. It also describes how an engine works.
http://www.kent4x4offroading.co.uk/how_does_a_diesel_engine_work.htm
It gives a tells how a diesel engine runs step by step in detail with at least 3 different explanations to how that phase of it works.
Subscribe to:
Posts (Atom)
